As a maker of high-quality appliances for decades, Maytag knows that even the best appliances experience issues from time to time. More likely than not, you took a lot of time to research your washing machine's features and benefits before purchasing it. But you probably didn’t spend much time researching all the different Maytag washing machine error codes and what they mean.
Thankfully, you’ll never have to. We’ve assembled a helpful guide to all the different error codes you’ll see on top-loading and front-loading Maytag washing machines.
Maytag Washing Machine Issues
When it comes to washing machine error codes, some issues crop up more often than others. Here are some common washing machine issues and how to resolve them:
- Load balance issues: Top-loading washing machines need the load to be relatively balanced within the basket. If your machine refuses to operate because of an unbalanced load, simply redistribute the load more evenly.
- Water not draining: This can be caused by an installation issue or a drain issue. The error code tends to pop up when the washer takes more than eight minutes to drain.
- Washer door can’t be locked: A washer door that won’t lock is usually caused by an object stuck in the door lock. Check the door for any small items or lint buildup. Removing any obstructions will typically fix this issue.
Error Codes for Top-Loading Maytag Washing Machines
Error Code | Meaning | Solution |
Drn | Draining issue | Review the washer hose installation to ensure the hose is installed correctly. |
F#, E#, F## | System error | Press Start/Pause to clear the code, then press it again to restart the washer. If the issue persists, contact a professional. |
HC | Hot and cold inlet hoses installed in reverse | Turn off the water supply and swap the hoses so that each is connected to the correct inlet. |
LdL | Lid cannot lock | Check the locking mechanism for any obstructions that are preventing the lid from locking properly. |
LdU | Lid cannot unlock | This usually occurs when items are placed on top of the washer lid. Remove any items from the lid to allow it to unlock. |
LF, Lo FL, F8 E1 | Fill cycle takes too long | Check the water supply in your home to ensure that both the hot and cold water supplies are active. |
Lid | Lid left open | Close the lid to clear the code. |
Ofb | Unbalanced load | If the washer has stopped, open the washer, evenly redistribute the load, and then close the lid and restart the cycle. |
OL | Oversized load | If the washer has stopped, remove several items from the basket and restart the cycle. |
PF | Power failure | Touch and hold Start to restart the washer cycle after it was interrupted by a power failure. Press Power if you only need to clear the code. |
Sud | Excessive suds | Ensure you used the correct detergent. Open the lid and allow the water to drain, then manually remove the excess suds. |
Error Codes for Front-Loading Maytag Washing Machines
Error Code | Meaning | Solution |
LOC, LC | Control lock activated | Press the control lock button. Some models require you to press and hold the button, while others require a single press. |
dET | Detergent cartridge was not detected | Ensure the cartridge is inserted into the dispenser drawer correctly. If you are using single-load doses of detergent, ignore this message. |
Int | Cycle interrupted | Press the pause or cancel button twice. If the code does not clear, disconnect the washer for one minute. |
rL, F34 | Items detected during a clean washer cycle | Remove the items from the basket and restart the cycle. |
Sud, Sd | Excessive suds | This code will automatically clear as the washer takes additional time to clear the water and suds. Ensure you use the correct detergent and check the drain hose for any kinks or clogs. |
F5 E2 | The Door is not locking properly | Ensure that there are no items blocking the door’s locking mechanism. |
F7 E1 | Motor speed sensing error | Check for any remaining shipping bolts and ensure the washer load is not excessive. |
F8 E1, LO FL | Low water flow | Check your home’s water system to ensure that the flow is functioning. If the flow rate is fine, make sure your water inlet hoses are not kinked or clogged. |
F8 E2 | Dispenser system issue | Select models only. Ensure the detergent drawer or cartridge is not clogged with detergent. |
F9 E1 | Excessive drain time | Make sure the drain hose is not clogged or kinked. |
Other F# E# code | Other error | Disconnect the washer for one minute and reconnect it. If the code does not clear, contact a professional. |
Find a Mr. Appliance® Professional in Your Area
Maytag washing machine error codes might not make sense the first time you see them, but with this guide, you can tackle any code that appears on your screen. If you cannot clear a code or need help with your washer or other appliance repairs, your local Mr. Appliance is here to help. Call us or schedule service online for prompt washing machine repair.
Great Reasons to Hire Mr. Appliance
Qualified Experts
Workmanship & Parts Warrantied
Upfront pricing contactless authorization and payment.
Courteous, Uniformed Professionals
Service on Your Schedule
Special Offers
A Neighborly Company
Schedule ServiceClick to Call
Contact Mr. Appliance today to schedule your next service!
Schedule Service
or callphone number(888) 998-2011
Click to Call
Call us directly at
Call phone number (888) 998-2011
- Service Information
- Schedule Day/Time
- Contact Information
- Service Details
Were sorry. We dont currently provide service to
Choose Nearby Location.
Your ZIP/Postal code is outside of our standard service area. Please choose from the list below of nearby locations.
We need a little more information.
Your address allows us to provide you with the best service possible:
Tell us where youre located.
Tell us where youre located.
Schedule a service:
Service Category
Select a specific service below to proceed:
Call us directly atCall phone number
How can we help you?
or choose from the popular services for change
Services Information
Please select your preferred date and time or choose to get a call back.
Schedule Date and Time
Diagnostic Fee - Our in-home service professionals will look at your appliance, diagnose the problem, and give you an exact quote. If you choose not to have the repair done, you pay only the diagnostic fee.
For EMERGENCY same day scheduling please call (603) 728-4145 otherwise choose from our scheduling options below.
Date and Time Selected:
Contact Information
Service Details
We're not servicing this area yet...but we will be soon! Please fill out our Contact Us form and we'll add you to our waiting list. As soon as we're in your area we'll contact you right away.
Share this on social platform