How to Prepare Isinglass: 13 Steps (with Pictures) - wikiHow (2024)

  • Categories
  • Arts and Entertainment
  • Artwork

Download Article

Explore this Article

parts

1Soaking the Bladders

2Simmering the Paste

3Filtering and Drying Isinglass

Other Sections

Tips and Warnings

Things You'll Need

Related Articles

References

Co-authored bywikiHow Staff

Last Updated: February 17, 2024References

Download Article

Isinglass is a gelatin-based glue used as an adhesive in art conservation, for preserving parchment, or as a clarifying agent in alcoholic drinks. Although you can purchase prepared isinglass, you can also make it yourself. As long as you have 3 days, dried fish swim bladders, and a double boiler, you'll be able to make your own isinglass.

Part 1

Part 1 of 3:

Soaking the Bladders

Download Article

  1. 1

    Purchase dried and unclotted sturgeon swim bladders. You can purchase sturgeon bladders online or from some artist supply stores. Before using the bladders, inspect them to make sure they're free of blood clots and other large blemishes.

    • Hake, cod, or other fish with swim bladders can work as an alternative. Sturgeon bladders are, however, most commonly used.[1]
  2. 2

    Put the swim bladders in a container filled with room temperature water. The amount of water should be in an approximate 1:10 swim bladder-to-water ratio. Place the container somewhere that it can sit undisturbed while the water softens the swim bladders.

    • A glass container is ideal so you can keep an eye on the swim bladders while they soak.
    • Pour the water and swim bladders into a container with mL markings on the side. This will help you pour the water more accurately.

    Advertisem*nt

  3. 3

    Soak the swim bladders for 24 hours. Let the swim bladders soak for approximately 1 day. After 24 hours, the swim bladders should be easily pulled apart and spongy to the touch.[2]

    • Cutting the swim bladders into smaller pieces can help the isinglass soak up water.
  4. 4

    Knead the swim bladders into a thick paste. Using your hands, work the swim bladders into a paste. Continue kneading until the paste is a consistent, doughy texture and contains no larger chunks.

    • Leave the swim bladders in the container while you knead them.
    • If you have smaller flakes in the paste that you can't work out with your hands, don't worry. These inconsistencies will be filtered out after boiling.
  5. Advertisem*nt

Part 2

Part 2 of 3:

Simmering the Paste

Download Article

  1. 1

    Set up a double boiler. Fill the bottom part halfway with water, then set it on a stovetop burner. Place the top part of the double boiler onto the bottom part.

    • If you don't have a double boiler, you can make one as an alternative. To make your own double boiler, fill a pot with water and put it over your stovetop. Place a thick wooden block in the water. Set a glass beaker on top of the wooden block to keep it afloat while you boil the swim bladder paste.
  2. 2

    Fill the glass beaker or double boiler with the swim bladder paste and water. This water should be the same water you used to fill the container while the swim bladders soaked. Do not add more water, as too much can dilute the paste.

  3. 3

    Let the swim bladder paste simmer at 140°F (60°C). Turn on the stovetop to begin heating the paste. Keep the temperature consistent, as overheating the paste can damage its consistency. Use a thermometer to monitor the water temperature, checking it every few minutes as needed.[3]

    • Keep a glass of cold water on hand to cool the water in the bottom part of the double boiler if necessary.
  4. 4

    Stir the swim bladder paste for 45 minutes. Use your thermometer or a spoon to stir the paste for about 45 minutes. Continue stirring until the paste completely dissolves and turns the water a milky white color.

    • You should stir the swim bladder paste consistently for the entire 45 minutes.
  5. Advertisem*nt

Part 3

Part 3 of 3:

Filtering and Drying Isinglass

Download Article

  1. 1

    Filter the isinglass glue through a nylon stocking. Place a nylon stocking over the top of a glass container and pour the isinglass glue into it. The stocking should catch any residual inconsistencies and help make the glue smooth.

    • If you do not have a nylon stocking, you can use a cheesecloth or a coffee filter as an alternative.
  2. 2

    Pour the glue onto a non-stick mylar sheet. Place the mylar sheet on a flat surface where it can stay for 1-2 days undisturbed. Spread the glue over the mylar sheet with a spoon or spatula to prevent areas of pooling that will take longer to dry.

    • As an alternative, you can also pour the isinglass glue in small, even dots. This will remove the need to cut the sheet later on.
    • Although a mylar sheet is traditional, you can also spread the isinglass over a polyester plastic sheet as an alternative.
  3. 3

    Let the isinglass dry for 12-24 hours. Depending on the room's temperature, drying the isinglass should take between 12-24 hours. Leave the isinglass undisturbed while it dries to prevent damaging or contaminating it.[4]

    • Set up a plastic cover over the isinglass to keep it away from dust and impurities.
  4. 4

    Cut the dried isinglass into pieces. Isinglass is easier to store if you cut it in pieces instead of a large sheet. The isinglass pieces should be a size small enough for all of them to fit in your storage container.

  5. 5

    Store the isinglass in an airtight container. Isinglass will keep best if tightly sealed in a cool, dry atmosphere like a pantry or cupboard. Leave the isinglass in storage until you're ready to use it. If stored correctly, isinglass can keep for up to several years.[5]

    • Isinglass is traditionally used for clarifying alcoholic drinks, restoring art, and conserving parchment.
  6. Advertisem*nt

Expert Q&A

Ask a Question

200 characters left

Include your email address to get a message when this question is answered.

Submit

      Advertisem*nt

      Tips

      • Preparing isinglass should take approximately 3 days. Plan ahead to make sure you have isinglass when you need it.[6]

        Thanks

        Helpful0Not Helpful0

      • If you don't have the time to prepare isinglass, you can also buy it in a prepared form.[7]

        Thanks

        Helpful0Not Helpful0

      Submit a Tip

      All tip submissions are carefully reviewed before being published

      Submit

      Thanks for submitting a tip for review!

      Advertisem*nt

      Warnings

      • Because isinglass is made from fish swim bladders, it is not vegetarian. Do not use isinglass to change your wine's consistency if you're a vegetarian.[8]

        Thanks

        Helpful0Not Helpful0

      Advertisem*nt

      Things You'll Need

      • Sturgeon, hake, or cod swim bladder
      • Water
      • Glass beaker
      • Double boiler
      • Thermometer
      • Spoon
      • Nylon stocking
      • Non-stick mylar sheet
      • Plastic cover
      • Sharp knife or scissors

      You Might Also Like

      How toIdentify a PaintingHow toWrite in Calligraphy
      How toMake a MannequinHow to Animate in ProcreateHow to Host a Successful Art ExhibitionHow toDo Digital Art on Your PhoneHow to Create a 3D Model Using Design SoftwareHow toCritique ArtworkHow to Use Procreate to Make StickersHow toWrite With a Calligraphy PenHow toMat ArtworkHow toSign a PaintingHow toBatik

      Advertisem*nt

      About This Article

      How to Prepare Isinglass: 13 Steps (with Pictures) - wikiHow (32)

      Co-authored by:

      wikiHow Staff

      wikiHow Staff Writer

      This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow's Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards. This article has been viewed 30,638 times.

      14 votes - 100%

      Co-authors: 4

      Updated: February 17, 2024

      Views:30,638

      Categories: Artwork

      • Print
      • Send fan mail to authors

      Thanks to all authors for creating a page that has been read 30,638 times.

      Reader Success Stories

      • How to Prepare Isinglass: 13 Steps (with Pictures) - wikiHow (33)

        Melanie Melancon

        Jan 21, 2021

        "For years, I had been thinking that Isinglass was a mineral substance, like Mica. Way off! Thanks for the..." more

      Did this article help you?

      Advertisem*nt

      How to Prepare Isinglass: 13 Steps (with Pictures) - wikiHow (2024)
      Top Articles
      Latest Posts
      Article information

      Author: Kelle Weber

      Last Updated:

      Views: 5858

      Rating: 4.2 / 5 (53 voted)

      Reviews: 84% of readers found this page helpful

      Author information

      Name: Kelle Weber

      Birthday: 2000-08-05

      Address: 6796 Juan Square, Markfort, MN 58988

      Phone: +8215934114615

      Job: Hospitality Director

      Hobby: tabletop games, Foreign language learning, Leather crafting, Horseback riding, Swimming, Knapping, Handball

      Introduction: My name is Kelle Weber, I am a magnificent, enchanting, fair, joyous, light, determined, joyous person who loves writing and wants to share my knowledge and understanding with you.